1L HIPOL GL-5 80W-90

Vehicle gear mineral oil with very good lubricating, antioxidative, anticorrosive and antifoaming properties.
Manufacturer: Orlen Oil
SKU: ORHI80W-901
6 in stock
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

General features

Vehicle gear mineral oil with very good lubricating, antioxidative, anticorrosive and antifoaming properties.

Application

Mineral oil intended to lubricate gears of vehicles operating in very difficult conditions, especially for gearboxes and final drives, where API GL-5 oil is recommended, it is featured by perfect properties guaranteeing maximal protection against mechanical wear out.

Standards, approvals, specifications

Approval for use in the side gear shaft and the housing track frames in the heavy equipment of Huta Stalowa Wola (HSW)

Physical and chemical properties

 

Parameters Unit Typical values
Quality class according to SAE J 306-OCT 91 - 80W-90
Kinematic viscosity at 100°C mm2/s 14.5
Viscosity index - 99
Flow temperature 0C -30
Solidification point 0C -
Ignition temperature 0C 220
Resistance to foaming: · foam volume after 5 min. of air blowing at 25°C/95°C/25°C following the test at 95°C · foam volume after 10 min. standing still at 25°C/95°C/25°C following the test at 95°C ml 10/20/10 0/0/0
Corrosiveness to copper 3 h/120°C, corrosion rate reference sample 2b
Lubricating properties on a four ball pressure tester: · weld load, · loaded wear ratio kG 400 56
ATTENTION: Physicochemical parameters listed in the table are typical values. Real values are stated in quality control certificates attached to each product lot.
Products specifications
Attribute name Attribute value
Classification Gear Oil
Oil Grade 80W-90
Pack Size 1lt
Brands Orlen Oil

General features

Vehicle gear mineral oil with very good lubricating, antioxidative, anticorrosive and antifoaming properties.

Application

Mineral oil intended to lubricate gears of vehicles operating in very difficult conditions, especially for gearboxes and final drives, where API GL-5 oil is recommended, it is featured by perfect properties guaranteeing maximal protection against mechanical wear out.

Standards, approvals, specifications

Approval for use in the side gear shaft and the housing track frames in the heavy equipment of Huta Stalowa Wola (HSW)

Physical and chemical properties

 

Parameters Unit Typical values
Quality class according to SAE J 306-OCT 91 - 80W-90
Kinematic viscosity at 100°C mm2/s 14.5
Viscosity index - 99
Flow temperature 0C -30
Solidification point 0C -
Ignition temperature 0C 220
Resistance to foaming: · foam volume after 5 min. of air blowing at 25°C/95°C/25°C following the test at 95°C · foam volume after 10 min. standing still at 25°C/95°C/25°C following the test at 95°C ml 10/20/10 0/0/0
Corrosiveness to copper 3 h/120°C, corrosion rate reference sample 2b
Lubricating properties on a four ball pressure tester: · weld load, · loaded wear ratio kG 400 56
ATTENTION: Physicochemical parameters listed in the table are typical values. Real values are stated in quality control certificates attached to each product lot.
Products specifications
Attribute name Attribute value
Classification Gear Oil
Oil Grade 80W-90
Pack Size 1lt
Brands Orlen Oil